The important information is that all the good things have been kept. The perfect size, the ultimate strength, the great aerobatic capabilities, the wide speed range, the rugged construction. Also we commit to impressive, new schemes as always. Composite parts painted in the molds with touched up seams as well as functional accessories have always been the key components for our Flash/Ultraflash, and will be in the future.
Getting the UltraFlash EVO in the air will require no more than 10 hours of work, including the installation of servos and propulsion. THAT's a revolution for the price.
ARF KIT
However, there were still a few things which grew a little outdated over time. So nobody needed the receiver pack pockets in the wood structure anymore, where the bulky NiCd batteris would fit - neither the mount for the mechancial air valve. Even though it was a little sentimental when we actually got rid of it: 12 years of an un-paralleled success story eliminated.
But all the improvements in detail, the fine tuning of the successful design, make still a big difference and a great step forward. Of course pre-fabrication became even higher, we even include and install an electric retract for you right in the factory.
The fuselage is pretty much unchanged on the outside, in the wood structure details lie the improvements. A simplifying "nose job" allows easier gear and RC installation. We have eliminated the intake liner, shortened the structural intakes to give more room for fuel. The canopy mount has remained the same, as well as the simple but attractive cockpit tub, which can be installed easily for a great look.
The wing was redesigned in the gear mount area, allowing the struts and wheels of the new retracts to fit precisely into the wheel wells. The servo mounts for the flap and aileron servos are now pre-assembled and absolutely ready for your servo install.
The one piece stab will accept elevator servos with up to 21 mm width now and will be installed with two M4 Bolts.
Subtle but noticable changes in this area have really improved the overall quality and practicability of the UltraFlash. The Turbine mounting itself hasn't changed, but we have redesigned how the thrust tube assembles and mounts in the fuselage. The connection between carbon bell mouth and stainless thrust tube is prepeared with pre-drilled holes so that it can be inserted in the fuselage and then screwed together in seconds. We have also changed the thrust tube material to the hard and superlight 0.15mm stainless steel we were able to source.
Last but not least, a new fuel tank with 3.5 l capacity will eliminate the need for the wing tank when using larger engines, and render the optionally available saddle tanks copletely unnecessary. Instead the wing tank can be used for smoke. Therfore the intakes have been shortened and the removable intake liner eliminiated. This simplification of the fuel system is one of the biggest improvements, we're sure. For the SPEED junkies it can be said, that the optional small main tank in conjunction with the full intake liner, are still available and can be installed optionally.
A new electric retractable landing gear has been designed and put in production, which fits the new UltraFlash EVO like a glove. This E-Gear is pre-installed by the factory and immediately functional. Highly abrasion restistant wheels are installed, electric brakes are perfectly dimensioned for a smooth and safe stop.
We offer an extremely high-quality assembly service and can deliver either an ARF+ or a fully flight-ready PNP model – including turbine, fully installed servos and wiring, electric retracts, and pre-installed fuel tanks. If you choose the PNP version, final assembly takes only a few hours… Getting a sport jet like our UltraFlash EVO into the air has never been easier! At the same time, the images show what your model can look like after assembly – a true masterpiece of engineering and design.
For our UltraFlash EVO, we offer a wide range of accessories. These include electric retractable landing gear from either JP or Electron, matching fuel tanks, the thrust tube, and an optional UAT. Additionally, we offer high-quality MacGregor servos in combination with our own CARF-Models servo arms – perfectly matched to the model and the demands of a high-performance sport jet.
Like all our airplanes, the UltraFlash EVO is not different. It boasts meticulously applied PU paintwork, expertly executed in the molds. If you're seeking a personalized touch, we offer color swaps and completely custom designs developed through collaborative efforts between you and our skilled artists. Below are our Standard Schemes and a few standout examples:
Well, that's the only area where there is no change at all. It is just as awesome as all the previous versions of Flash/UltraFlash were, to put this design pinnacle through its paces.
From an effortless short take-off, through smooth flight routines the Ultra Flash installs confidence in any pilot who controls it. Rock solid when flown slowly, the large flaps make slow flybys a joy, but clean up and open the throttle fully and the Ultra Flash becomes a racing thoroughbred, the clean lines allow smooth fast aerobatics where she ’tracks like on rails’ When it’s time to land, the greatest joy occurs, lower the flaps to the landing position, increase the power to counter the huge drag and fly the Ultra Flash around to your landing site threshold, only chopping the power at the last minute, allows a super gentle touch down and short rollout. The Ultra Flash EVO, just as its predecessors, will give rewarding performance with any turbine from 100-140 N thrust.
.jpeg)
I've been a fan of the CARF Flash since its first release. I knew I needed to own a CARF Ultra Flash after seeing its first picture. Despite not being able to afford it for several years due to being young, they fulfilled their dream in 2019. The Ultra Flash proved to be perfect for their flying style from the first flight. In 2021, they upgraded to the newer EVO version with a new paint scheme and upgraded electronic components, paying special attention to weight reduction. Since then, the Flash has been a fixed part of their hangar, impressing them with its performance and speed. They find it to be a beautifully designed airframe that always puts a smile on their face.
Lars Rössling (Team Pilot)
The CARF-Models Ultra Flash is not just fast, it's also a real beauty. I've owned two of these: one in bright yellow with a JetCat 140RX engine, and another in bold orange with a Jets Munt 140 turbine. Both of them have been amazing to fly.
Elad Fish, USA (Team Pilot & Sales Rep)
 |
70" (1800 mm) |
|
|
81" (2065 mm) |
|
|
22 - 28 Lbs (10 - 13 kg) dry |
|
|
80 - 160 N |
|
|
7 - 8 high power digital servos |
