Small Sport jets are trendy...! The CARF-Models Joker is following this development, based on our former, smaller EDF Sport Jet "Spark", now slightly enlarged, simplified in design, and prepared for the increasingly popular 70-80 N jet engines.
ARF KIT
With a 160 cm wingspan and a little under 2m length, it features a single-piece wing and stab mounted to the fuselage from the bottom with 2 dowels and 2 bolts; all control surfaces are pre-hinged as elastic flaps. To make it even more compact, the fuselage has a removable nose cone, allowing it to be transported in very small cars. The box is also very small, so UPS can ship it around the globe at economical prices.
The component layout is very simple; open ducting and a single central fuel tank make the installation very easy and light. It is prepared to side-mount 8 common 15 mm servos, such as a Mac Gregor MGB 5216 HV. Prefabrication is so complete that only the servos need to be clicked in, and the engine needs to be mounted with 4 screws. The electric retract is included in the kit and already installed. A complete hardware set includes linkages and all necessary German-quality hardware. In terms of prefabrication and completeness, it also serves as a benchmark.
The Joker's fuselage has a separate nose cone to allow easy access to the nose gear and possibly to house batteries. There is enough room for the turbine between 70-85N, and all the wooden parts are already preinstalled and ready for the RC installation.
All elevator servos are prepared to be mounted inside the stab. Common-size 15 mm servos are used. A standard 15 mm mini servo drops in and is held down with a carbon plate and two screws. The hardware bag includes high-quality linkages cut to their exact length.
Subtle yet noticeable changes in this area have significantly improved the UltraFlash's overall quality and practicality. The Turbine mounting itself hasn't changed, but we have redesigned how the thrust tube assembles and mounts in the fuselage. The connection between the carbon bell mouth and the stainless thrust tube uses pre-drilled holes, allowing it to be inserted into the fuselage and screwed together in seconds. We have also changed the thrust tube material to the hard and superlight 0.15mm stainless steel we were able to source.
Last but not least, a new 3.5 l fuel tank will eliminate the need for the wing tank when using larger engines and make the optional saddle tanks completely unnecessary. Instead, the wing tank can be used for smoke. As a result, we shortened the intakes and eliminated the removable intake liner. This fuel-system simplification is one of the biggest improvements; we're sure. For the SPEED junkies, the optional small main tank, in conjunction with the full intake liner, is still available and can be installed.
A new electric retractable landing gear has been designed and put into production, which fits the new Joker like a glove. Highly abrasion-resistant wheels are installed, and electric brakes are perfectly sized for a smooth, safe stop.
We offer an extremely high-quality assembly service and can deliver either an ARF+ or a fully flight-ready PNP model – including turbine, fully installed servos and wiring, electric retracts, and pre-installed fuel tanks. If you choose the PNP version, final assembly takes only a few hours… Getting a sport jet like our UltraFlash EVO into the air has never been easier! At the same time, the images show what your model can look like after assembly – a true masterpiece of engineering and design.
For our Joker, we offer a wide range of accessories. These include electric retractable landing gear from either JP or Electron, matching fuel tanks, the thrust tube, and an optional UAT. Additionally, we offer high-quality MacGregor servos in combination with our own CARF-Models servo arms – perfectly matched to the model and the demands of a high-performance sport jet.
Like all our airplanes, the Joker is no different. It boasts meticulously applied PU paintwork, expertly executed in the molds. If you're seeking a personalized touch, we offer color swaps and fully custom designs developed through collaboration between you and our skilled artists. Below are our Standard Schemes and a few standout examples:
Flight performance is comparable to even larger Sport Jets. The CARF-Models Joker flies "large". Not twitchy at all, rock solid, it maneuvers. The speed range is wide, and both the aerobatic capabilities and slow-flight characteristics are extremely impressive. You have to see it; you have to fly it yourself to believe.
 |
63" (1600 mm) |
|
|
77" (1950 mm) |
|
|
14 Lbs (6.5 kg) dry |
|
|
70-80 N |
|
|
8 high torque digital mini servos |
This is a preliminary Instruction Manual with the most important information to build and set up our Joker. It will be sufficient for now to support your equipment installation and help set up the plane for the first flights.
